Specifications:

• Door: 24 ga. galvanized steel, with knock-over tabs and easily attached to the duct.
• Frame: 24 ga. galvanized steel, 1″ thick, double wall construction and insulated
• Hinge: Continuous piano
• Latch: Self-tightening and hand operated

The design of this stackable and portable fire extinguisher stand makes it easy to move from jobsite to jobsite. With only 14 lbs. Fire-Mate goes right to work for you. This fire extinguisher stand holds 5, 10, or 20 lb.extinguisher and is ideal for construction sites, exhibit halls, workshops or wherever a fire extinguisher is required but cannot be permanently mounted.

We can ship this fire extinguisher stand to your job site!

We can put your company’s Logo on the product free with any order over 10 units.

All safety products are supplied with one (1) FIRE or one (1) CAUTION decal on the front.

Available in Red, Yellow or Orange.

(Fire extinguisher shown in pictures not included)

SPECIFICATIONS

• Measures 34″ in Height
• Measures 21”x21” at the base
• 7-1/4″ x 7-1/4″ x 8″ holding area for fire extinguisher.
• Durable HDPE Plastic
• Designed To Nest and Stack For Efficient Mobility.
• Knock Over Resistant.
• Holds 5 lb., 10 lb., or 20 lb. Extinguishers (please measure diameter of extinguisher, must be 7-1/4″ or less)
• Custom LOGO available
• 14 lbs.
• Red, Yellow or Orange
• Made in the USA
• Manufactured using rotational molding process (explain…)
• Used at construction sites, exhibit halls, shops or wherever a fire extinguisher is required but cannot be permanently mounted
• Compliance: 29 CFR 1910.144 (1910.144 – Safety color code for marking physical hazards.)
• Compliance: OSHA 1926.24 (1926.24 – Fire protection and prevention.)

FireMate® with Fire Extinguisher Sign, Eye Wash Station Sign and Kit		FireMate® with Fire Extinguisher Sign
Eye Wash Kit (EWK)	Eye Wash Station Sign (EWS)	Fire Extinguisher Sign and Rod (FES)
First Aid Kit (FAK)	First Aid Station Sign (FAS)	Fire Extinguisher Cover (FEC-SW, FEC-LW)

GREAT STUFF PRO™ Gaps & Cracks Insulating Foam Sealant is a minimal-expanding, single component polyurethane foam sealant for general purpose building envelope air sealing. As the first foam sealant to be recognized as a fireblock, GREAT STUFF PRO™ Gaps & Cracks resists the free passage of flames to other areas of the building through concealed spaces. Identifiable orange color.

Designed to fill gaps up to 3″ (75 mm), GREAT STUFF PRO™ Gaps & Cracks Insulating Foam Sealant expands to take the shape of cracks and voids, forming a permanent, airtight and water-resistant bond to vinyl, wood and metal surfaces.(1) Once cured, it remains soft and flexible, permitting natural expansion and contraction of surrounding surfaces. GREAT STUFF PRO™ Gaps & Cracks helps prevent drafts and repel water, helping enhance energy efficiency and improve occupant comfort.

Simplify foam application with PRO Series foam dispensing guns (PRO 13, PRO 14). Use GREAT STUFF PRO™ Gun Cleaner  to simplify cleanup of uncured polyurethane foam from dispensing guns and work areas.

For window and door framework, minimal-expanding GREAT STUFF PRO™ Window & Door Insulating Foam Sealant is proven not to distort or bow the framework, when properly applied.

Item#: W-GSGC24 – Case of 12, 24oz cans only $130.99
(only $10.91 per can)

Specifications:

• Fireblock sealant for residential Type V applications
• Fills, seals and insulates gaps up to 3″
• Bonds to most building materials
• High yield, up to 1,000 linear ft x 3/8″ bead
• Controlled expansion
• Quick cure and trim
• Identifiable orange color
• One can = 26 quart tubes of caulk

Use for:

• Wall and roof intersections
• Attic access
• Sill plates
• Water and furnace flues
• HVAC duct penetrations
• Chimney flashing
• Electrical penetrations
• Plumbing and utility penetration
• and many many more applications

Now Available at Hallmann Sales for $199.99. FREE Ground Shipping in the US only. Order today at www.Hallmann-Sales.com or call 866-966-9596.

FEATURES:

• Tank: Highly visible yellow, UV protected polyethylene tank, with no moving parts with 18 gallon capacity.
• Eyewash: ABS plastic eyewash heads with easy activation removable pull strap will deliver a minimum water flow of 0.4 gpm [1.5 liters] for 15 minutes. Pull strap caps form an air tight seal which prevents dust and debris from collecting on the eyewash heads.
• Mounting: A J-shaped heavy duty stainless steel wall bracket for wall mounting allows easy removal and remounting of the eyewash station. The eyewash station can also be placed on a countertop or other flat surface. Drain hose: Supplied with three feet of 1/2″ ID drain hose.
• Labels: Highly visible high gloss identification/operation label and inspection/ maintenance label are fixed to the face of the tank.
• Water preservative: One container of concentrated water preservative is supplied with each eyewash station to increase the storage life of the water.
• Weekly inspection tag: A water resistant test card to record the date and inspector’s name, for weekly inspection of the eyewash station.
• Made in the USA